NSI Gold, BAFE and SSAIB: What the Accreditations Actually Mean

Rest Assured Older Couple

When choosing a company to install or maintain your intruder alarm, CCTV or fire alarm system, the accreditations listed on its website are one of the quickest ways to judge whether it can be trusted with the work. Names such as NSI Gold, SSAIB and BAFE appear on vans, quotes and tender documents across the industry, but they are not interchangeable. Each one tells you something different about what a company has been assessed on and the type of work it is approved to carry out.

In this guide, we explain what each accreditation means, how they compare, why insurers and tenders often ask for them, and how you can check that a contractor’s certification is genuine and covers the work you need.

NSI Gold, SSAIB and BAFE Compared

NSI and SSAIB are independent certification bodies that audit security and fire safety companies against British and European standards, whereas BAFE is an independent register for fire safety companies that sets the scheme rules but does not conduct the assessments itself. All three are widely recognised security company accreditations in the UK, and the table below outlines how they differ.

NSISSAIBBAFE
What It IsAn independent, not-for-profit certification body accredited by UKASAn independent, not-for-profit certification body accredited by UKASAn independent register of fire safety companies, which is not a certification body itself
Founded1971, operating as NSI since 200119941984
Main Areas CoveredSecurity systems, fire safety systems and guarding servicesSecurity systems, fire detection and monitoring servicesFire safety only, including fire alarms, extinguishers, emergency lighting and fire risk assessment
How Approval WorksRegular audits of a company’s technical work against industry standards, with Gold also requiring an ISO 9001 quality management systemRegular audits of a company’s work against industry standards and scheme requirementsCompanies are assessed against BAFE scheme criteria by UKAS-accredited certification bodies
Approved CompaniesAround 1,800Over 2,000Listed on the BAFE register by scheme

The key takeaway from this comparison is that NSI and SSAIB tell you who has audited a company, whereas BAFE shows which specific fire safety schemes it has been audited against. Many fire and security companies hold more than one of these accreditations to cover the range of services they provide.

What Is NSI Gold Accreditation?

NSI Gold accreditation is the highest level of approval awarded by the National Security Inspectorate. It shows that a company meets the industry’s highest technical standards and operates an ISO 9001 quality management system that is subject to continual improvement. NSI also offers a Silver level, which requires the same technical competence but does not include ISO 9001. NSI describes it as a stepping stone towards Gold.

There are two main Gold schemes, depending on the type of work a company carries out:

  • NACOSS Gold covers security systems, including intruder and hold-up alarms, CCTV, access control and scaffolding alarms
  • Fire Gold covers fire safety work, such as fire detection and alarm systems, emergency lighting, gaseous fire suppression, portable fire extinguishers and fire risk assessment

To gain and keep NACOSS Gold, a company must:

  • Complete enough installations for NSI to judge the quality of its work
  • Pass a two-stage audit of its quality management system, including inspections of its work on site
  • Security screens all operational staff to BS 7858 before certification is granted
  • Work to standards such as PD 6662 for intruder alarms, BS 8243 for confirmed alarms, BS 9263 for maintenance and BS 8418 for remotely monitored CCTV
  • Be re-audited by NSI on a regular basis, typically twice a year

This is why an NSI-approved company is recognised by insurers and the police, as NSI certification is one way a company can meet the National Police Chiefs’ Council Security Systems Policy for police-response alarms. Fire Gold also works alongside BAFE, as NSI is licensed to assess companies against BAFE schemes. Therefore, a company holding Fire Gold for a particular scheme is also listed on the BAFE register for that work.

What Is SSAIB Accreditation?

SSAIB accreditation shows that a company has been independently audited by the Security Systems and Alarms Inspection Board and meets the standards and codes of practice that apply to its work. Like NSI, SSAIB is accredited by UKAS and recognised by insurers and the police across the UK.

SSAIB certifies companies across a range of security and fire safety work, including:

  • Intruder alarms, CCTV and access control
  • Scaffold alarms, vacant property alarms and lone worker devices
  • Alarm receiving centres and other monitoring centres
  • Fire safety companies working to BAFE schemes

Certification involves an assessment of a company’s business processes, staff knowledge and installations against the relevant standards, and the company must then pass an annual surveillance visit to keep its certificate valid. For intruder alarms, SSAIB certification shows compliance with the National Police Chiefs’ Council and Police Scotland policies, so a certified installer can apply for a Unique Reference Number (URN) for police response.

NSI Gold vs SSAIB for Intruder Alarm Installation

NSI Gold and SSAIB both show that an intruder alarm installer has been independently audited against the same industry standards, and the difference lies in how each scheme is structured rather than in which one is better.

  • Both are UKAS-accredited, recognised by insurers and accepted by the police for alarms that need police response
  • NSI Gold includes an ISO 9001 quality management system as part of the approval, with inspections typically twice a year
  • SSAIB certifies a company’s technical work through its product schemes with an annual surveillance visit, and offers ISO 9001 as a separate certification that companies can add

When comparing installers, the most useful thing to check is whether their certificate covers the specific system you need, such as an intruder alarm, CCTV or access control, rather than which body issued it.

What Does BAFE Registration Mean?

BAFE registration indicates that a fire safety company has been independently assessed and found competent to carry out a specific type of fire safety work, such as installing fire alarms or maintaining fire extinguishers. Rather than a single approval, BAFE operates a set of separate schemes, and a company is registered only for the schemes it has been assessed against.

The main BAFE schemes for commercial premises include:

  • SP203-1 for fire detection and fire alarm systems
  • SP203-3 for fixed gaseous fire suppression systems
  • SP203-4 for emergency lighting
  • SP101 for portable fire extinguishers
  • SP205 for life safety fire risk assessment
  • SP206 for kitchen fire protection systems

For a fire alarm installer, SP203-1 is the scheme to look for, and it is split into four modules covering design, installation, commissioning and handover, and maintenance. A company can choose to be assessed on only the modules relevant to its work, so a contractor registered for maintenance alone is not necessarily approved to design or install a new system. A commercial fire safety contractor should therefore hold the BAFE scheme and the SP203-1 modules relevant to each service it provides on your premises.

What Is the Difference Between BAFE Registration and Third-Party Certification?

Third-party certification is the independent assessment of a company’s work, carried out by a UKAS-accredited certification body. BAFE registration is the public listing that shows a company has passed the assessment against a BAFE scheme. BAFE writes and manages the scheme rules, while licensed certification bodies such as NSI, SSAIB and NICEIC conduct the audits. Home Office fire safety guidance for businesses recommends using third-party-certified products and services, as they provide independent evidence of a contractor’s competence. Some companies hold third-party certification through other recognised schemes, such as the BSI Kitemark for fire alarm installations, rather than through BAFE.

Does a BAFE Registered Company Cover All Fire Safety Services?

No, a BAFE-registered company is approved only for the specific schemes and modules listed on its certificate. For example, a company registered for SP101 fire extinguishers is not approved to design or install fire alarm systems unless it also holds SP203-1 for those modules. Before appointing a contractor, check the BAFE register to confirm that each service you need is covered.

Why Do Insurers Specify Approved Installers?

Insurers specify approved installers for security systems because independent certification gives them evidence that a system has been designed, installed and maintained to recognised standards, which reduces their risk and gives them a clear basis for underwriting and settling claims. An alarm fitted by an uncertified company may look the same on the wall, but the insurer has no independent proof that it was graded correctly or will work when it is needed.

Approved installers give insurers several forms of assurance:

  • Correct grading, as certified installers assess the risk and specify systems to EN 50131 and PD 6662, so the alarm grade matches the threat
  • Ongoing audits, which confirm that systems continue to be installed and maintained to the specified grade
  • Police response, as only certified installations can obtain the URN needed for police attendance
  • Fewer false alarms, which helps keep police response in place and systems working when they matter
  • Documentation, as approved by installers, issues a Certificate of Compliance that supports underwriting decisions and the validation of claims

The Certificate of Compliance is often the most important of these for a business, as it is the document your insurer may ask to see after a break-in. NSI-approved installers alone have issued more than 2.5 million certificates across the UK, and keeping yours with your policy documents makes it much easier to show that your system meets the conditions of your cover.

Which Accreditations Should a Commercial Contractor Have?

A commercial security contractor should hold NSI or SSAIB certification for each type of system it installs or maintains, while a fire safety contractor should hold third-party certification, such as BAFE registration, for each fire safety service it provides. In both cases, the key requirement is that the certification covers the exact work being carried out on your premises.

As a guide, look for the following depending on the work involved:

  • Intruder alarms, CCTV and access control: NSI NACOSS Gold or Systems Silver, or SSAIB certification, for each type of system, with operational staff security screened to BS 7858
  • Fire alarms: BAFE SP203-1 for the modules you need, whether that is design, installation, commissioning and handover or maintenance
  • Fire extinguishers, emergency lighting and fire risk assessment: The matching BAFE scheme, such as SP101, SP203-4 or SP205

Fire safety is closely linked to your legal duties. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person for a building must appoint one or more competent persons to help implement fire safety measures. A competent person is defined as someone with sufficient training, experience, or knowledge to do so properly. Third-party certification is one of the clearest ways to demonstrate that a contractor meets this definition.

Security Installer Accreditation Requirements for Tenders

When writing a tender for security or fire safety work, it is good practice to require bidders to hold current approval for every service covered by the contract, rather than general approval in just one area. NSI recommends requesting Gold approval when the work requires a formal quality management system. For intruder and hold-up alarms, require a Certificate of Compliance and a police URN for each installation. Many tenders also require health and safety pre-qualification through schemes such as CHAS, SafeContractor or Constructionline. These are recognised under Safety Schemes in Procurement (SSIP), so contractors do not need to be assessed separately for each scheme.

Facilities managers appointing a contractor outside a formal tender should apply the same checks. The organisation, not the contractor, is responsible for choosing a competent contractor.

How to Verify a Contractor’s Certification

The most reliable way to verify a contractor’s certification is to search for the company on the register of the body that issued it, rather than relying on a logo on a website or van. Each body keeps a public, searchable list of the companies it currently approves:

  • NSI: The NSI Company Finder on the NSI website
  • SSAIB: The Search Suppliers tool on the SSAIB website
  • BAFE: The BAFE register on the BAFE website, searchable by company and scheme

When you find the company, it is worth checking the following before you appoint them:

  • The company name and address match the business quoting for your work, including any trading names
  • The certificate is current and has not expired or been suspended
  • The scope covers the exact service you need, such as intruder alarms rather than CCTV, or SP203-1 installation rather than maintenance only
  • The certification body is accredited by UKAS, which you can confirm on the UKAS website
  • The contractor can provide a copy of its certificate and, for completed alarm installations, a Certificate of Compliance

Taking a few minutes to check these details protects you from contractors who display accreditations they no longer hold or whose accreditations do not cover the work being quoted. It also gives you a clear record to show your insurer if they ask.

Understanding what each accreditation covers makes it much easier to compare contractors and appoint one that is genuinely approved for the work you need. Croma Fire and Security is NSI Gold approved and BAFE registered. As with any accredited company, you can confirm our approval on the NSI and BAFE registers before you get in touch.

Frequently Asked Questions

Is NSI or SSAIB Certification a Legal Requirement?

There is no general legal requirement for a security installer to hold NSI or SSAIB certification, but in practice it is needed for most commercial work. The National Police Chiefs’ Council requires that alarms requiring a police response be installed, maintained and monitored by companies certified by a UKAS-accredited body. Most commercial insurers set the same condition, so an uncertified installer will rarely meet a business’s needs.

What Is UKAS?

The United Kingdom Accreditation Service (UKAS) is the sole national accreditation body recognised by the UK government, and it assesses organisations that carry out certification, testing and inspection. UKAS accredits certification bodies such as NSI and SSAIB, which in turn certify security and fire safety companies. UKAS accreditation is what gives their certificates independent weight.

What Is BS 7858 Security Screening?

BS 7858 is the British Standard for screening people who work in secure environments, and it is used to verify that staff working on security systems are trustworthy. Screening to the current version, BS 7858:2019, includes identity and right-to-work checks, a minimum of five years of verified employment history, a criminal record check through the Disclosure and Barring Service (DBS), and a financial check for issues such as County Court Judgments.

Is Fire Industry Association Membership the Same as Certification?

No, membership of the Fire Industry Association (FIA) is not a certification in its own right, as the FIA is a not-for-profit trade association for the UK fire safety industry. However, it requires all members to be third-party certified or working towards certification, so FIA membership is a useful sign of commitment that should be checked alongside the certification itself.

Blog   Croma Locksmiths   UK

Roberto Fiorentino

Chief Executive Officer

About the Author

Roberto Fiorentino is Chief Executive Officer of Croma Security Solutions Group Plc and brings over 40 years of experience across the full spectrum of the security industry.

 

A recognised pioneer in the sector, Roberto has played a key role in evolving security from a traditional deterrent-based approach to the delivery of integrated, technology-driven solutions that actively protect people, businesses, and assets.

 

In the early 1990s, he was among the first to explore remote CCTV monitoring via telephone lines, later advancing to the development of remote mobile viewing over data connections—innovations that helped shape modern security practices.

 

Under his leadership, Croma has strengthened its core operations through a clear focus on technological innovation, alongside the successful execution of a number of strategic acquisitions.

Read More Insights